Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on the Peugeot 206 CC?

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Fuel pump

As seen in this tutorial, replacing the fuel pump on the Peugeot 206 CC is an extremely simple and quick operation. Before proceeding, disconnect the negative terminal of the battery to work safely. Start by going to the passenger side, then flip the front seat and remove the rear seat base. Next, open the large central cap, disconnect both fuel lines and the power connector, and undo the outer ring. At this point, you can extract the old pump and fit the replacement by following the reverse procedure.

Updated on 11 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to dismantle the fuel pump of the Peugeot 206
How to dismantle the fuel pump of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Let’s look at the procedure necessary to dismantle and replace the fuel pump of the Peugeot 206. First, open the rear doors and start by removing the…
How to Replace the Fuel Pump in a Peugeot 206
How to Replace the Fuel Pump in a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In today's video, see how to replace the fuel pump in a Peugeot 206. First, open the rear hatch and lift the seat. Now, remove the cover and then ext…
How to Replace the Fuel Pump on the Peugeot 206
How to Replace the Fuel Pump on the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) This guide briefly explains the instructions and steps to disassemble and replace the fuel pump on the Peugeot 206. First, open the rear doors and re…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos