Do it yourself
Frequently asked questions about cars and motorcycles

How to dismantle the fuel pump of the Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Fuel pump

Let’s look at the procedure necessary to dismantle and replace the fuel pump of the Peugeot 206. First, open the rear doors and start by removing the rear seat by lifting it upwards; once removed, take off the plastic cover of the pump. Next, disconnect the electrical connector of the fuel level sensor and disconnect the fuel hoses; then unscrew the pump ring by tapping with a screwdriver or using the appropriate tool to remove it and replace it with the new one, as shown in the video!

Updated on 5 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 206 (1998-2012 / MK 1) This short and simple procedure will show us how to disassemble and replace the fuel pump of the Peugeot 206, as well as the Citroen C3. First, we op…
Peugeot 206 (1998-2012 / MK 1) This guide briefly explains the instructions and steps to disassemble and replace the fuel pump on the Peugeot 206. First, open the rear doors and re…
Peugeot 206 (1998-2012 / MK 1) In this video, you can see where the fuel pump is located in the Peugeot 206, useful if you need to replace it or the associated float. As shown, the…

Other guides you may be interested in

How to Replace the Cabin Filter on the Opel Grandland X

If you own an Opel Grandland X and want to know the steps to replace the cabin air filter, carefully read the following guide and follow the described steps. First, enter the vehicle and go to the passenger side. Then, locate the box containing the air filter in the lower side area of the dashboard. Remove the cover of the box and finally replace the old filter with the new one. Refit the cover, and you are done.

Watch the video!


by ScegliAuto

More videos