Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump in a Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Fuel pump

In today's video, see how to replace the fuel pump in a Peugeot 206. First, open the rear hatch and lift the seat. Now, remove the cover and then extract the cap underneath, using a small hammer as a lever. After some elbow grease, you will be able to pull out the fuel pump. Be careful during extraction, as the item in question is soaked in petrol. Next, replace the part by inserting the new fuel pump. Reassemble everything, put the seat back in place, and the operation will be complete.

Updated on 14 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the fuel pump of the Peugeot 206
Replacement of the fuel pump of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) This short and simple procedure will show us how to disassemble and replace the fuel pump of the Peugeot 206, as well as the Citroen C3. First, we op…
How to Replace the Fuel Pump on the Peugeot 206
How to Replace the Fuel Pump on the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) This guide briefly explains the instructions and steps to disassemble and replace the fuel pump on the Peugeot 206. First, open the rear doors and re…
How to dismantle the fuel pump of the Peugeot 206
How to dismantle the fuel pump of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Let’s look at the procedure necessary to dismantle and replace the fuel pump of the Peugeot 206. First, open the rear doors and start by removing the…

Other guides you may be interested in

Where is the Spare Wheel in the Peugeot 5008?

This video shows where the spare wheel is located in the Peugeot 5008 and how to access it, useful in case of a puncture. As shown, the wheel is not in the usual boot compartment but underneath it, outside the vehicle. To free the wheel, first gather the tools provided, then open the boot, locate the small indicated hatch, and open it. Next, loosen the bolt just released using the large socket wrench enough to lower the wheel to the ground.

Watch the video!


by ScegliAuto

More videos