|
Do it yourself
| |||
| ||||
How to Reset the BSI on a Peugeot Partner
Model: Peugeot Partner Tepee
MK 1
- Years 1996-2013
The BSI is the box that houses the fuses within the cabin. It communicates with all the onboard electronic units such as ABS, climate control, engine management, and allows devices to function according to user requests. To reset the BSI, follow the instructions below. Access the driver's seat, open and leave the driver's door open, insert the key into the ignition and turn it on. Then, locate the two multifunction levers on the right and left of the steering wheel and pull them simultaneously towards you, holding them for a few seconds until you hear a sound. At that point, the reset will have been completed, and any issues with certain electrical circuits in the vehicle will have been cleared.
Updated on 4 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Peugeot Partner Tepee
(2008-2018 /
B9)
You can reset the BSI unit on a Peugeot Partner by connecting a diagnostic tool to the vehicle's OBD port, located at the bottom of the steering colu…
Peugeot Partner Tepee
(2008-2018 /
B9)
In order to reset the BSI unit of the Peugeot Partner, you will need to connect a diagnostic tool to the OBD port of the vehicle: this port is locate…
Peugeot Partner Tepee
(1996-2013 /
MK 1)
In today's article, we will see how to restore the BSI of the Peugeot Partner. For this operation, no tools are needed, and this procedure is useful …
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.146
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
