Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 2008
    4. : How to reset the trip computer on a Peugeot 2008

Peugeot 2008 - Video tutorial

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: -board computer
Operation: How to reset the trip computer on a Peugeot 2008

Thanks to this very short video tutorial, let's see how it is possible to reset the on-board computer on a first generation Peugeot 2008, model in production from 2013 to 2019. First we need to turn on the vehicle's instrument panel, then press the settings button on the central touch screen display of the vehicle, then select the "configuration" item and after the "system configuration" item, finally click on "factory parameters" and "reinitialize", once this is done, we give the confirmation and the resetting our on-board computer will begin.


Posted on 13 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Peugeot 2008 2019-2026 - How to reset the tire pressure warning light on Peugeot 2008? Read Answer
    • Peugeot 2008 2019-2026 - What to do if the Peugeot 2008 touch screen does not turn on? Read Answer
    • Peugeot 2008 2019-2026 - How to turn off the Service warning light on Peugeot 2008? Read Answer
    • Peugeot 2008 2019-2026 - What to do if the Peugeot 2008 screen does not work? Read Answer
    • Peugeot 2008 2019-2026 - What is the problem that Peugeot 2008 has with AdBlue? Read Answer
    • Peugeot 2008 2019-2026 - What to do if the touch screen does not work on Peugeot 2008? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos