Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Battery in the Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Battery

This video tutorial shows how to replace the battery in the Peugeot by following a few simple steps to help you manage your vehicle better. First, get into the car, remove the key, and engage the handbrake. Next, pull the lever to open the bonnet; lift the bonnet and secure it with the prop rod. The battery is located on the right side of the engine bay. Open the top of the battery cover by pressing the buttons that hold it in place, lift the tab that secures the positive terminal and disconnect it after removing it, then move it away from the battery to avoid dangerous sparks for the car's electrical circuit; use a 10 mm socket to loosen and remove the negative terminal. Remove the battery cover by sliding it upwards, then use a 7 mm socket to unscrew the battery support plate and extract the battery, replacing the old battery with the new one.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 206 (1998-2012 / MK 1) This short guide will show us how to disassemble and replace the battery of the Peugeot 206 1.4i. First, let's open the car's hood and begin removing…
Peugeot 206 (1998-2012 / MK 1) If you want to replace the battery of your Peugeot 206 on your own, just follow the steps described in the following guide and apply them step by ste…
Peugeot 206 (1998-2012 / MK 1) If the battery of the Peugeot 206 is flat and does not hold charge after subsequent attempts, proceed with the replacement. Open the bonnet, remove t…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos