Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove and replace the battery of the Peugeot 206 1.4i

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Battery

Video tutorial

This short guide will show us how to disassemble and replace the battery of the Peugeot 206 1.4i. First, let's open the car's hood and begin removing the cover located at the top right of the engine compartment; then disconnect both battery terminals (positive and negative), subsequently unscrewing the bracket screw located at the bottom, as shown in the video.

At this point, remove the battery from its compartment, replacing it with the new one (of the right type and having the same amperage); connect the battery, securing it with the lower bracket.


Posted on 18 January 2026 by ScegliAuto


Related tutorials

How to replace the battery of the Peugeot 206
How to replace the battery of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) If you want to replace the battery of your Peugeot 206 on your own, just follow the steps described in the following guide and apply them step by ste…
How to replace the battery of the Peugeot 206
How to replace the battery of the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) To replace the battery inside the engine compartment of your Peugeot 206 by yourself, you must follow the procedure described in our new mini guide. …
Removing the Clutch Cable of the Peugeot 206 1.4
Removing the Clutch Cable of the Peugeot 206 1.4
Peugeot 206 (1998-2012 / MK 1) Below are the instructions that will allow you to remove and replace the clutch cable of the Peugeot 206 1.4. First, open the vehicle's bonnet and be…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos