Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Tailgate Panel on a Peugeot 308?

Model: Peugeot 308 T7, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Door trim panel

See other generations:
Video tutorial

In this tutorial, you will see how to remove the rear tailgate panel of the Peugeot 308, a very simple operation. To do this, you will need a plastic spatula, a Torx T20 screwdriver, and, if necessary, new retaining clips.

Start by opening the tailgate, then detach the upper panel and unclip the cover located in front of the hinges. Next, unscrew the screws that have just been exposed, remove the two pillars, and unscrew the first two retaining screws of the panel.

Continue by unscrewing the remaining screws located inside the two recesses, and unclip the panel from the tailgate.


Updated on 18 July 2026 by ScegliAuto


Related tutorials

How to Remove the Electric Lock of the Tailgate on the Peugeot 308 MK1
How to Remove the Electric Lock of the Tailgate on the Peugeot 308 MK1
Peugeot 308 (2007-2014 / T7, MK 1) In today's video tutorial, see how to remove and replace the electric lock of the tailgate on the first series Peugeot 308 in simple and quick steps.…
How to Install a Reversing Camera on a Peugeot 308
How to Install a Reversing Camera on a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) To install a reversing camera on a Peugeot 308, use a tool to pry off the small panels located inside the tailgate. Under these panels, you will find…
How to Remove the Rear Light of the Peugeot 308?
How to Remove the Rear Light of the Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) To remove the rear light of the Peugeot 308, open the tailgate to detach the plastic panel inside the boot corresponding to the light to be removed. …

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos