Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlamp Bulb of the Peugeot 3008

Model: Peugeot 3008 P84, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tail light bulb

See other generations:
Video tutorial

With the help of this short video tutorial, we will explain how to replace the rear headlamp bulb of the Peugeot 3008. The first step is to open the tailgate of your Peugeot and, using a lever, remove the side plastic cover protecting the stop light.

Remove the two bolts holding it in place and disconnect the connectors, being very careful not to damage the wires.

Now, you can remove and insert the new bulb into the stop light. After completing this simple operation, you can proceed to reassemble the headlamp.

So, reconnect the connectors, screw in the two screws, and refit the protective cover. Before hitting the road, it’s wise to do a test.


Updated on 18 July 2026 by ScegliAuto


Related tutorials

How to replace the rear headlight bulb of the Peugeot 3008
How to replace the rear headlight bulb of the Peugeot 3008
Peugeot 3008 (2009-2016 / MK 1, T84) In this new guide of ours, we will discover how to correctly replace the rear headlight bulb of your Peugeot 3008. First of all, you need to purchase…
How to Replace the Rear Fog Light on the Peugeot 3008
Peugeot 3008 (2009-2016 / MK 1, T84) Today, see the instructions on how to remove and replace the rear fog light and bulb on the Peugeot 3008. First, move to the rear and start unscrewin…
How to disassemble the rear headlight of the Peugeot 3008 and 5008
How to disassemble the rear headlight of the Peugeot 3008 and 5008
Peugeot 3008 (2009-2016 / MK 1, T84) The right rear light of the Peugeot 3008 can be removed from its housing following the same procedure used for removing the rear light of the Peugeot…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos