Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Shell of a Peugeot 3008?

Model: Peugeot 3008 MK 1, T84 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Key

See other generations:
Video tutorial

To replace the key shell of the Peugeot 3008, use a tool to pry open the gap between the two halves of the remote: this will allow access to the internal coding chip and its battery, which must be removed from their housing. Once these two components are removed, correctly position them inside the new shell and close it with the appropriate clips.

Once the new device is assembled, insert the key into the ignition barrel to check that it functions correctly.


Updated on 31 July 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery of the Peugeot 3008?
How to Replace the Remote Battery of the Peugeot 3008?
Peugeot 3008 (2009-2016 / MK 1, T84) To replace the remote battery of the Peugeot 3008, first detach the fastening pin at the top of the device, allowing the chrome upper part and the ke…
How to Replace the Key Battery in the Peugeot 3008?
How to Replace the Key Battery in the Peugeot 3008?
Peugeot 3008 (2009-2016 / MK 1, T84) It is important to clarify that the key shown in the video, for which the battery is being replaced, is from a Mazda, but this tutorial is applicable…
How to Replace the Key Battery of a Peugeot 3008
How to Replace the Key Battery of a Peugeot 3008
Peugeot 3008 (2009-2016 / MK 1, T84) Today, you will learn how to replace the battery of the key for a Peugeot 3008; this procedure can also be applied to other Peugeot key models. To re…

    Frequently Asked Questions

    • 3008 2016-2023 - What does the red warning light on the Peugeot 3008 wrench indicate? Read answer
    • 3008 2009-2016 - How to replace the battery in the key of a Peugeot 3008? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos