Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to fit roof bars on a Peugeot 208?

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Roof rack bars

See other generations:
Video tutorial

As shown in this tutorial, fitting roof bars on a Peugeot 208 is an extremely simple and quick operation. First, insert the two side supports into the front bar, then adjust them according to the width of the area where you will position it. Next, open both front doors, position the bar, and tighten the bolts of the fixing clamp.

Finally, cover both supports with their respective covers and repeat the operation for the rear bar. The procedure may vary depending on the model of the bars being used.


Updated on 1 August 2026 by ScegliAuto


Related tutorials

How to replace the antenna on the Peugeot 208?
How to replace the antenna on the Peugeot 208?
Peugeot 208 (2012-2019 / MK 1, A9) To replace the antenna on the Peugeot 208, use a tool to pry off the courtesy light cover located at the front upper part of the car roof: once remov…
How to Reset the Service Light on the Peugeot 208
How to Reset the Service Light on the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) On the Peugeot 208, resetting the maintenance interval and oil light is done directly from the instrument cluster. With the Peugeot 208 stationary an…
How to disassemble the external rearview mirror of the Peugeot 208
How to disassemble the external rearview mirror of the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) If you want to replace the external rearview mirror of your first edition Peugeot 208 by yourself, all you have to do is follow all the steps describ…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos