Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light in the Peugeot 2008?

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Service warning light

Resetting the service light in the Peugeot 2008 is an extremely simple and quick operation; let's see how to proceed in this tutorial. Before doing this, ensure you have completed all required scheduled maintenance tasks. Start by entering the cabin, then insert the key, press and hold the "SET" button located in the centre of the dashboard, and simultaneously turn on the ignition. At this point, you will notice a countdown appearing on the display; keep the button pressed until the 10 seconds are up, and finally restart the vehicle.

Updated on 7 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Peugeot 2008
How to reset the service light on the Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Performing the reset of the service light of a Peugeot 2008 car is a simple and quick operation. To carry out the reset steps, we must: -turn on the …
How to reset the "Service" light on a Peugeot 2008?
How to reset the "Service" light on a Peugeot 2008?
Peugeot 2008 (2019-2026 / MK 2) Good morning, today the goal is to reset the "Service" light on our Peugeot 2008. Before performing this procedure, it will be necessary to have prop…
How to Reset the Service Light on the Peugeot 2008?
How to Reset the Service Light on the Peugeot 2008?
Peugeot 2008 (2019-2026 / MK 2) The procedure to reset the Service light on the Peugeot 2008 requires you to hold down the button located at the end of the lever on the left of the …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos