Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a Centre Console in the Renault Partner

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

First, remove the plastic cover of the handbrake. Next, take out the existing centre console by unscrewing all the screws that secure it to the chassis.

Now, remove the console. You can find the console with drawer on AliExpress for £110.84 (+£29.94 shipping).

Place the base in position, ensuring the handbrake fits inside it. Refit all the screws and replace the handbrake covers. Now, you can slot the drawer into its housing, and the operation is complete.


Updated on 10 August 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Warning Light in a Peugeot Partner Van?
How to Reset the Tyre Warning Light in a Peugeot Partner Van?
Peugeot Partner Tepee (2008-2018 / B9) In this tutorial, you will learn how to reset the tyre warning light in a Peugeot Partner van, a very simple and quick operation. Before doing this, …
Removing the Radio from a Partner
Removing the Radio from a Partner
Peugeot Partner Tepee (2008-2018 / B9) How to remove the radio from a Peugeot Partner? Let's see how to do it. Insert the release keys into the holes on the plastic cover of the stereo, th…
How to Reset the Tyre Warning Light in a Peugeot Partner Van?
How to Reset the Tyre Warning Light in a Peugeot Partner Van?
Peugeot Partner Tepee (2008-2018 / B9) In this tutorial, see how to reset the tyre warning light in a Peugeot Partner van, a very simple and quick operation, to be performed only after res…

    Frequently Asked Questions

    • Partner Tepee 2008-2018 - Where is the Peugeot Partner jack located? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos