Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Shift Cable on the Peugeot 206?

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Transmission

In this tutorial, see how to replace the gear shift cable on the Peugeot 206, a very simple operation. First, lift the front of the vehicle, taking the necessary safety precautions, then remove the indicated bolts and disconnect the exhaust pipe. Next, move inside the cabin, remove both the gear knob and the gaiter, and undo the bolts securing the mechanism. Once this is removed and the old cable disconnected, fit the replacement and follow the reverse procedure to reassemble everything.

Updated on 11 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel on Peugeot 206
How to Remove the Door Panel on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Remove the damaged door panel on a Peugeot 206 (right side). Disconnect the battery terminals located in the engine bay. Remove the plastic next to t…
How to Replace the Coolant Temperature Sensor on a Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To replace the coolant temperature sensor on a Peugeot 206, open the bonnet to access the components inside the engine bay. The coolant temperature s…
How to Replace the Coolant Temperature Sensor on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) To replace the coolant temperature sensor on a Peugeot 206, open the bonnet to access the components in the engine bay. The coolant temperature senso…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos