Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the External Wing Mirror from the Peugeot 208

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Side mirror

See other generations:
Video tutorial

In this brief guide, you will find step-by-step instructions to remove and replace the external wing mirror of the Peugeot 208. First, open the front door and start removing the door panel; to do this, unscrew the fixing screws found on the sides and under the plastic cover of the grab handle, as shown in the video.

After disconnecting the wiring at the back of the door panel, you can unscrew the mirror screws; disconnect its electrical connector to pull the mirror out from the outside, replace it with the new one, and reassemble everything!


Updated on 13 August 2026 by ScegliAuto


Related tutorials

How to disassemble the external rearview mirror of the Peugeot 208
How to disassemble the external rearview mirror of the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) If you want to replace the external rearview mirror of your first edition Peugeot 208 by yourself, all you have to do is follow all the steps describ…
How to disassemble the external rearview mirror of the Peugeot 208
How to disassemble the external rearview mirror of the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) In order to remove the external rearview mirror of your first series Peugeot 208, all you have to do is follow all the steps described in this new mi…
How to Remove the Exterior Mirror of a Peugeot 208
How to Remove the Exterior Mirror of a Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) Before you can start, open the front door of your Peugeot 208. Begin by unclipping and removing the internal cover located near the exterior mirror. …

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos