Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Light of the Peugeot Partner

Model: Peugeot Partner Tepee B9 - Years 2008-2018
Part: Tail light

Follow these steps to remove the rear light of the Peugeot Partner to change a burnt-out bulb or replace it if damaged. Open the rear doors and unclip the metal latch to rotate the door as far as possible. Using pliers, unscrew the plastic bolt located halfway along the inner edge of the light, finishing the operation by hand. Inside the compartment, near the side, you will find a plastic clip that you will unclip using a screwdriver. To completely remove the light, disconnect the electrical connector by releasing the metal latch with a thin tool.

Updated on 18 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Headlamp Bulb on a Peugeot Partner
How to Remove the Rear Headlamp Bulb on a Peugeot Partner
Peugeot Partner Tepee (2008-2018 / B9) Before starting, open and unclip the rear doors of the load area of your Peugeot Partner. Begin by unscrewing and removing the screws that secure the…
How to Replace the Rear Light Bulb on a Peugeot Partner?
How to Replace the Rear Light Bulb on a Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) To replace the rear light bulb on a Peugeot Partner, open the tailgate. Unscrew the screws that secure the light unit within its housing and disconne…
How to Change the Rear Headlamp Bulbs on a Peugeot Partner Tepee
How to Change the Rear Headlamp Bulbs on a Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) Follow these main instructions to remove and replace the rear headlamp bulbs on the Peugeot Partner Tepee. First, move to the rear of the vehicle and…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos