Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 306
    4. : Removing the window lifter motor

Peugeot 306 - Video tutorial

Model: Peugeot 306 MK 1 - Years 1993-2002
Part: Window motor
Operation: Removing the window lifter motor

Using a screwdriver, unscrew all the screws on the door panel, also levering the various plastic clips. The wiper mechanics can now be accessed. First disconnect the engine electrical harness connector. Remove the metal plate held by the three bolts. With a ratchet wrench remove the four nuts that secure the motor block and release the stop at the base of the rod. Remove all mechanical wiper assembly. Proceed to repair by replacing the motor including the mechanical part of the rod movement. Reconnect the connector.


Posted on 23 June 2023 by ScegliAuto



How to disassemble the side window and the window regulator motor of the Peugeot 306
Peugeot 306 (1993-2002 / MK 1) In this guide we will discover the steps that will allow us to disassemble and replace the side glass and window mechanism of the Peugeot 306. First
Rear door window removal instructions
Peugeot 306 (1993-2002 / MK 1) In order to remove the rear door glass, it is clearly necessary to remove the door trim panel (the video shows the operation performed on a door comp
How do you replace the wiper motor on a Peugeot 306?
Peugeot 306 (1993-2002 / MK 1) In order to replace the wiper motor of the Peugeot 306, you need to go and open the bonnet, so that you have access to the components inside the engi

Other guides that may interest you

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos