|
Do it yourself
| |||
| ||||
How to Replace the Courtesy Bulb in the Rear View Mirror of a Peugeot 308 MK2
Model: Peugeot 308
T9, MK 2
- Years 2013-2021
In this video, you will see how to replace the courtesy bulb in the external rear view mirror of the Peugeot 308 second series. Please note that this bulb cannot be replaced as a single part by Peugeot, as it is an integrated component of the rear view mirror, which should be replaced along with the entire mirror, costing around £500. Instead, we will spend only £10. Let's see how to do it manually with a bit of patience and creativity, obtaining a bulb of the correct size and removing the bulb holder from the mirror. Naturally, some manual dexterity, a good magnifying glass, and some basic electrical knowledge are required. Once the bulb is inserted into the hole - as shown in the video - glue it with super glue and then with hot glue. Let's see how the electrical connection should be made: before reassembling, check its operation, and only then close everything up.
Updated on 1 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Peugeot 308
(2013-2021 /
T9, MK 2)
We observe how to disassemble the external rearview mirror in the Peugeot 308 in this helpful video tutorial. The reasons for carrying out this inter…
Peugeot 308
(2013-2021 /
T9, MK 2)
Before you start, sit in the driver's seat of your Peugeot 308. Press and hold the button located in the bottom right corner of the instrument panel,…
Peugeot 308
(2013-2021 /
T9, MK 2)
Before you can start, open the boot lid of your Peugeot 308. First, unclip and remove the lower boot floor. Then, unscrew the AdBlue refill cap. Once…
Other guides you may be interested in |
How to Reset the Tyre Pressure Light on the Opel Grandland X
While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.062
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |