Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Peugeot Bipper

Model: Peugeot Bipper Tepee MK 1 - Years 2007-2016
Part: Warning light – error code

To reset the service light on a Peugeot Bipper, follow these steps: Turn on the car and ensure the total mileage is displayed on the main screen. Press the "R" button or the "Trip" button on the dashboard to select the "Trip" mode. While holding down the "R" or "Trip" button, turn on the car. Continue to hold the button until the "SERVICE" message appears. Release the button and press it again for a few seconds until the display shows a message like "Reset Complete" or "Service Cancelled". Turn off the car and turn it back on to ensure the service reset has been performed correctly. The service indicator should have disappeared from the display.

Updated on 12 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting Service Light on Peugeot Bipper
Resetting Service Light on Peugeot Bipper
Peugeot Bipper Tepee (2007-2016 / MK 1) Do you want to reset the service light on a Peugeot Bipper? Here's how to reset the maintenance light. Enter the vehicle, turn on the ignition (you w…
How do you reset the Service light of the Peugeot Bipper?
How do you reset the Service light of the Peugeot Bipper?
Peugeot Bipper Tepee (2007-2016 / MK 1) In order to reset the Service light of the Peugeot Bipper, you need to loosen the screws that secure the panel located immediately below the steering…
How to reset the service in the Peugeot Bipper?
How to reset the service in the Peugeot Bipper?
Peugeot Bipper Tepee (2007-2016 / MK 1) In this tutorial, we can see how to reset the service indicator on the Peugeot Bipper, a very simple and quick operation to be performed only after c…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos