Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear lights in the Peugeot 3008?

Model: Peugeot 3008 MK 1, T84 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light

See other generations:
Video tutorial

In this tutorial, you will see how to remove the rear lights in the Peugeot 3008, for example, if you need to replace the bulbs or the light unit itself. First, ensure the key is not inserted, then open the tailgate and unclip the plastic cover on the inner edge of the light in question.

Next, unscrew the two bolts just released using a 10mm hex spanner, grasp the light unit, and pull it towards you to separate it from the bodywork. At this point, simply disconnect the power connector and replace the faulty element.


Updated on 19 September 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Fog Light on the Peugeot 3008
Peugeot 3008 (2009-2016 / MK 1, T84) Today, see the instructions on how to remove and replace the rear fog light and bulb on the Peugeot 3008. First, move to the rear and start unscrewin…
How to Replace the Rear Fog Light Bulb on a Peugeot 3008?
How to Replace the Rear Fog Light Bulb on a Peugeot 3008?
Peugeot 3008 (2016-2023 / P84, MK 2) To replace the rear fog light bulb on a Peugeot 3008, you need to access the inside of the rear bumper from underneath the vehicle: here you will fin…
How to replace the rear headlight bulb of the Peugeot 3008
How to replace the rear headlight bulb of the Peugeot 3008
Peugeot 3008 (2009-2016 / MK 1, T84) In this new guide of ours, we will discover how to correctly replace the rear headlight bulb of your Peugeot 3008. First of all, you need to purchase…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos