Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Partner Tepee
    4. : How to reset the tire pressure on a Peugeot Partner Tepee

Peugeot Partner Tepee - Video tutorial

Model: Peugeot Partner Tepee B9 - Years 2008-2018
Part: Checks and maintenance
Operation: How to reset the tire pressure on a Peugeot Partner Tepee

Today we will see how to reset the tire pressure on a Peugeot Partner Tepee, model B9 produced from 2008 to 2018. First of all, we need to turn on the vehicle and navigate to the radio controls, here we press the "MENU" button to open the navigation menu on the central dashboard display, then, still using the radio controls, we need to select the following items: "personalization-configuration", "define vehicle parameters", "driving assistance", "tire pressure". Once this last item is selected, we will be asked to confirm the correct tire pressure, so we confirm this request to complete the job.


Posted on 7 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Partner Tepee 2008-2018 - How to reset the engine error light on Peugeot Partner? Read Answer
    • Partner Tepee 2008-2018 - What does the yellow triangle warning light with an exclamation point on the Peugeot Partner indicate? Read Answer
    • Partner Tepee 2008-2018 - What does the orange triangle-shaped warning light with an exclamation mark mean on the Peugeot Partner? Read Answer
    • Partner Tepee 2008-2018 - What does the engine fault light on the Peugeot Partner mean? Read Answer
    • Partner Tepee 2008-2018 - What does the triangle light on the Peugeot Partner mean? Read Answer
    • Partner Tepee 2008-2018 - Where is the engine starter fuse located in the Peugeot Partner? Read Answer
    • Partner Tepee 2008-2018 - Where is the Peugeot Partner jack located? Read Answer
    • Partner Tepee 2008-2018 - What does the TPMS warning light mean on a Peugeot Partner? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos