Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 3008
    4. : How to install dynamic turn signals on the Peugeot 3008

Peugeot 3008 - Video tutorial

Model: Peugeot 3008 MK 2, P84 - Years 2016-2023
Part: Outside rearview mirror
Operation: How to install dynamic turn signals on the Peugeot 3008

In this video we see how to install dynamic turn signals on the external rearview mirror of a Peugeot 3008. The turn signals can be found under the code B08MTN43CH on Amazon at a price of 41.99 euros per pair, with free shipping for Prime customers. The kit includes, in addition to the pair of indicators, also the tools to perform the job, which is very simple. The mirror is composed of three pieces: the mirror, the body, and the cover. We start by taking the spatula, inserting it into the glass and levering it off its support. Now we lift its white tabs and gently push them to detach the mirror cover. Now we can remove the turn signal, and with the screwdriver we will remove the two screws, and disconnect the connector. Now we can insert our dynamic turn signals. Reconnect the connector, screw the screws back in, and before reassembling everything, make sure the turn signal is working! Put the cover back in place and then the glass with a light pressure. Job done.


Posted on 11 April 2024 by ScegliAuto

    Frequently Asked Questions

    • 3008 2016-2023 - What to do when the Peugeot 3008 mirror does not work? Read Answer
    • 3008 2016-2023 - What to do if the mirror of the Peugeot 3008 does not close? Read Answer

How to replace the Ford Transit key battery

Below I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key.

Watch the video!


by ScegliAuto

More videos