Do it yourself
| ||||
|
Peugeot 3008 - Video tutorial
Model: Peugeot 3008
MK 1, T84
- Years 2009-2016 If one of the devices in our Peugeot 3008 has suddenly stopped working, we can first of all check the status of the related fuses, whose diagrams are indicated in this video. As shown, the first box is located inside the cabin, behind the small glove compartment located in the lower area of the dashboard, on the driver's side. The second box is instead located in the engine compartment, protected by the black plastic cover near the battery. Make sure to replace faulty fuses with equivalent spare parts, and to operate with the vehicle turned off.
Posted on 25 April 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.038
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |