Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on the Peugeot RCZ

Model: Peugeot Rcz MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015
Part: Tail light bulb

Video tutorial

In this new mini guide, you will be guided step by step to replace the rear light bulb of your Peugeot RCZ. First, ensure you have a new compatible bulb. Then, lift the rear bonnet and locate the access panel on the side of the boot.

Open it and disconnect the electrical pin present. Once done, unscrew the two safety caps to remove the light unit and proceed to replace the faulty bulb with the new one. Finally, reassemble everything and the procedure is complete.


Updated on 28 September 2026 by ScegliAuto


Related tutorials

How do you replace the rear fog light bulb of the Peugeot RCZ?
How do you replace the rear fog light bulb of the Peugeot RCZ?
Peugeot Rcz (2010-2015 / MK 1) In order to replace the rear fog light bulb of the Peugeot RCZ, you need to use a tool to pry off the panel located at the bottom of the bumper, just…
How to Replace the Number Plate Bulb on a Peugeot RCZ?
How to Replace the Number Plate Bulb on a Peugeot RCZ?
Peugeot Rcz (2010-2015 / MK 1) To replace the number plate bulb on a Peugeot RCZ, use a tool to pry open the corresponding light unit from its housing. Once removed, disconnect the…
How to replace the bulb of the interior light of the 2010 Peugeot RCZ
How to replace the bulb of the interior light of the 2010 Peugeot RCZ
Peugeot Rcz (2010-2015 / MK 1) Today we will explain how to replace the bulb of the interior light fixture on a 2010 Peugeot RCZ. The first step is to remove the light fixture usin…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos