Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Distance Measurement Unit on the Peugeot 3008

Model: Peugeot 3008 MK 1, T84 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Instrument cluster

See other generations:
Video tutorial

If you want to change the distance measurement unit on your first-generation Peugeot 3008, follow these steps. First, get in the car and turn on the instrument cluster, then press the menu button located near the radio.

At this point, enter the settings screen and select the "Display configuration" option. Next, scroll down and select the "Choice of units" option, and click on your preferred measurement unit.

Finally, go back and exit the settings menu to save the changes.


Updated on 2 October 2026 by ScegliAuto


Related tutorials

How to reset the BSI unit of the Peugeot 3008?
How to reset the BSI unit of the Peugeot 3008?
Peugeot 3008 (2016-2023 / P84, MK 2) To reset the BSI unit of the Peugeot 3008, connect a diagnostic tool to the vehicle's OBD port: this is located on the lower left side of the dashboa…
Where is the ECU located in the Peugeot 3008 Hybrid?
Where is the ECU located in the Peugeot 3008 Hybrid?
Peugeot 3008 (2016-2023 / P84, MK 2) In this tutorial, you can see where the engine ECU is located in the Peugeot 3008 Hybrid, useful if you need to replace it. As shown, the ECU is posi…
How to reset the BSI unit of the Peugeot 3008?
How to reset the BSI unit of the Peugeot 3008?
Peugeot 3008 (2009-2016 / MK 1, T84) To reset the BSI unit of the Peugeot 3008, keep the instrument cluster off and do not open any doors for about 3 minutes; then, disconnect the negati…

    Frequently Asked Questions

    • 3008 2009-2016 - Start and stop system not working on the Peugeot 3008 what to do? Read answer

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos