Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the BSI unit of the Peugeot 3008?

Model: Peugeot 3008 T84, MK 1 - Years 2009-2016
Part: Warning light – error code

In order to reset the BSI unit of the Peugeot 3008, you will need to keep the instrument panel off and not open any doors for about 3 minutes; then, you will need to disconnect the negative terminal connected to the battery, wait fifteen seconds and reconnect it, waiting another fifteen seconds. By turning on the instrument panel again, you will be able to see that the BSI light is no longer on; after resetting the light, you can turn off the instrument panel by turning the key. This way, you will notice that the unit has been reset.

Posted on 6 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the BSI unit of the Peugeot 3008?
How to reset the BSI unit of the Peugeot 3008?
Peugeot 3008 (2016-2023 / MK 2, P84) To reset the BSI unit of the Peugeot 3008, connect a diagnostic tool to the vehicle's OBD port: this is located on the lower left side of the dashboa…
How to Reset the BSI Light on a Peugeot 3008?
How to Reset the BSI Light on a Peugeot 3008?
Peugeot 3008 (2009-2016 / T84, MK 1) The BSI light on the Peugeot 3008 indicates that the alternator is not charging the battery, causing the battery icon light to illuminate. To turn of…
How to restore the BSI of a Peugeot 3008 using the AVDI tool
How to restore the BSI of a Peugeot 3008 using the AVDI tool
Peugeot 3008 (2016-2023 / MK 2, P84) In this video, we see how to restore the BSI of a Peugeot 3008 using the AVDI tool, which is an advanced diagnostic tool mainly used for maintenance …

Other guides you may be interested in

    Frequently Asked Questions

    • 3008 2016-2023 - Does Cisa mean the triangular warning light with the exclamation point on the Peugeot 3008? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos