Do it yourself
| ||||
|
Peugeot 3008 - Video tutorial
Model: Peugeot 3008
MK 2, P84
- Years 2016-2023 In order to reset the BSI unit of the Peugeot 3008, you need to connect a diagnostic tool to the OBD port of the vehicle: this port is located on the lower left side of the dashboard, next to the steering column. Once the scanner is connected, you can select the model of the car and its corresponding version: this way, you can reset all the errors stored in the unit. After completing this procedure, you can disconnect the scanner and check that everything is working properly.
Posted on 6 March 2024 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.020
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |