Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Time on Peugeot Partner

Model: Peugeot Partner Tepee MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Clock

See other generations:
Video tutorial

In this video, you will see how to change the time on a Peugeot Partner, as well as on a Citroen Jumpy or a Fiat Scudo: the procedure is the same for all three models. First, turn on the ignition.

Press the button located on the right side of the instrument cluster, corresponding to the fuel reserve indicator. Hold it down for about 3 seconds.

When the time starts flashing on the display, press the button firmly; with each click, the hour will advance by one unit until it reaches the desired hour (the dial is in 12-hour format). Wait a few seconds, and it will automatically switch to minutes: repeat the same procedure for these; if you hold the button down, the speed increases; as you approach the time you want to set, click more slowly and then release the button, and the time will be saved automatically.


Updated on 4 October 2026 by ScegliAuto


Related tutorials

How to set the time on the central display of the Peugeot Partner Tepee
How to set the time on the central display of the Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) In a few simple steps, we will see the instructions that will allow us to change the time on the central display of the Peugeot Partner Tepee. First,…
How to set the time on Peugeot Partner and Citroen Berlingo
How to set the time on Peugeot Partner and Citroen Berlingo
Peugeot Partner Tepee (2008-2018 / B9) In this video we see how to change the time on the Peugeot Partner, as well as on the Citroen Berlingo. We act on the time using the button located a…
How to Set the Time in a Peugeot Partner Without the Radio?
How to Set the Time in a Peugeot Partner Without the Radio?
Peugeot Partner Tepee (2008-2018 / B9) The clock in a vehicle is mainly adjusted at distinct times, such as when switching from daylight saving time to standard time and vice versa, or if …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos