Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Door Trim of a Peugeot 2008

Model: Peugeot 2008 MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Door trim panel

See other generations:
Video tutorial

This useful video guide shows how to remove the rear door panel of a Peugeot 2008. Start the operation by taking a lever (preferably plastic to avoid damaging the trim) to remove the cover of the handle as shown in the video. Next, using a Torx key, remove the two screws located inside the handle and then all the other screws situated along the edge of the door panel.

Once done, detach the door panel and remove it as shown in the video.


Updated on 5 October 2026 by ScegliAuto


Related tutorials

How to set the rear door lock of the Peugeot 2008
How to set the rear door lock of the Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Today we will explain how to set the manual lock on the rear door of a Peugeot 2008 vehicle. This operation allows us to lock the rear doors when the…
How to Remove the Car Radio from a Peugeot 2008
How to Remove the Car Radio from a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Before you begin, sit in the driver's seat of your Peugeot 2008. Using a thin but sturdy tool, start by prying off and removing the car radio frame, …
Removing the Rear Door Panel and Speaker of the Peugeot 2008
Removing the Rear Door Panel and Speaker of the Peugeot 2008
Peugeot 2008 (2019-2026 / MK 2) Here are the instructions to remove and replace the rear door panel and speaker of the Peugeot 2008. First, open the rear door and start unscrewing t…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos