Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Door Panel and Speaker of the Peugeot 2008

Model: Peugeot 2008 MK 2 - Years 2019-2026
Part: Door trim panel

Here are the instructions to remove and replace the rear door panel and speaker of the Peugeot 2008. First, open the rear door and start unscrewing the fastening screws found on the sides using a Torx screwdriver. Then, remove the cover of the window switch by disconnecting the electrical connector underneath, as shown in the video. At this point, pry on the sides of the panel to detach and remove it, then also remove the speaker. Apply the reverse procedure for reassembly!

Updated on 7 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Door Panel of the Peugeot 2008?
How to Remove the Rear Door Panel of the Peugeot 2008?
Peugeot 2008 (2019-2026 / MK 2) To remove the rear door panel of the Peugeot 2008, loosen the screws that secure it to its housing: these screws are located on the sides of the pane…
Disassembly of the rear door panel of a Peugeot 2008
Disassembly of the rear door panel of a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Let's see through this very useful video guide today how to remove the rear door panel of a Peugeot 2008. Let's start the operation immediately by ta…
Removing and Replacing the Front Bumper on a Peugeot 2008
Removing and Replacing the Front Bumper on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) The main instructions in this guide will show you how to remove and replace the front bumper on a Peugeot 2008. First, open the bonnet of the vehicle…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos