Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the tailgate panel of the Peugeot 2008.

Model: Peugeot 2008 MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019

See other generations:
Video tutorial

Today we will see the process of disassembling and replacing the rear tailgate panel of the Peugeot 2008 trunk. First of all, we open the rear tailgate and start removing the two plastic covers of the side pillars; then we pry on the sides to detach and remove it, as shown in the video.

At this point, it will be possible to access the internal part of the rear tailgate, the windshield wiper motor, and the electrical part; finally, we reassemble the rear door panel, applying the reverse process of disassembly!


Posted on 10 December 2024 by ScegliAuto


Related tutorials

Removing the Rear Door Panel and Speaker of the Peugeot 2008
Removing the Rear Door Panel and Speaker of the Peugeot 2008
Peugeot 2008 (2019-2026 / MK 2) Here are the instructions to remove and replace the rear door panel and speaker of the Peugeot 2008. First, open the rear door and start unscrewing t…
Removing Front Door Panel on Peugeot 2008
Removing Front Door Panel on Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Do you want to remove the door panel on a Peugeot 2008? Let's see how to disassemble the parts to facilitate the removal of the panel. Use a trim too…
How to Remove the Front Door Panel on the Peugeot 2008?
How to Remove the Front Door Panel on the Peugeot 2008?
Peugeot 2008 (2019-2026 / MK 2) In this tutorial, see how to remove the front door panel on the Peugeot 2008, a very simple and quick operation. First, go inside the cabin, then rem…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos