Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of a Peugeot Rifter

Model: Peugeot Rifter MK 1 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Door trim panel

Video tutorial

Removing the driver's door panel on a Peugeot Rifter is a straightforward task. First, remove the upper side cover of the window and disconnect the connector.

Next, remove the cover of the locking handle using a plastic lever, then proceed to remove the switch panel. Unscrew the screws and detach the panel by pulling it upwards from the bottom without damaging the connector, which will need to be removed later.

Disconnect the handle body and detach the linkage, then remove the window motor by unscrewing the screw.


Updated on 7 October 2026 by ScegliAuto


Related tutorials

How do you set the clock on the Peugeot Rifter?
How do you set the clock on the Peugeot Rifter?
Peugeot Rifter (2018-2026 / MK 1) In order to adjust the clock of the Peugeot Rifter, you need to turn on the instrument panel by inserting the ignition key into the corresponding slo…
How do you reset the tire pressure light on the Peugeot Rifter?
How do you reset the tire pressure light on the Peugeot Rifter?
Peugeot Rifter (2018-2026 / MK 1) It will be possible to make the tire pressure warning light disappear completely from the instrument panel of the Peugeot Rifter by first inflating t…
How do you reset the tire pressure warning light on the Peugeot Rifter?
How do you reset the tire pressure warning light on the Peugeot Rifter?
Peugeot Rifter (2018-2026 / MK 1) The tire pressure sensor shown on the Peugeot Rifter's instrument panel can be reset by first inflating the tires until they reach the recommended pr…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos