Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor in a Peugeot 207 1.6 HDi 90

Model: Peugeot 207 MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Starter motor

This video is currently unavailable

Let's see how to proceed with the removal of the starter motor, keeping in mind that the work in the video is performed on a Peugeot 206, but it is the same for the Peugeot 207 of interest. It is installed in the engine bay, so that is where you will need to work.

Open the front bonnet, remove the air intake pipe for easier access, disconnect the electrical connector, and proceed to unscrew the bolts securing the starter motor, working both above the engine and below, accessing from underneath. Finally, fit the new starter motor using the reverse procedure.


Updated on 9 October 2026 by ScegliAuto


Related tutorials

Replacement of the starter motor of the Peugeot 207 1.6 HDi
Replacement of the starter motor of the Peugeot 207 1.6 HDi
Peugeot 207 (2006-2015 / MK 1) Today's guide will show us the instructions on how to disassemble and replace the starter motor of the Peugeot 207 1.6 HDi. First, we open the hood o…
How to Clean the EGR Valve of a Peugeot 207 1.6 hDi
How to Clean the EGR Valve of a Peugeot 207 1.6 hDi
Peugeot 207 (2006-2015 / MK 1) Before you can start, start the engine of your Peugeot 207 1.6 hDi, then open the bonnet. Begin by disconnecting one end of the hose connected to the…
Replacing the Diesel Filter on the Peugeot 207 - 208 1.4 - 1.6 HDI
Replacing the Diesel Filter on the Peugeot 207 - 208 1.4 - 1.6 HDI
Peugeot 207 (2006-2015 / MK 1) Discover in this video how to remove and replace the diesel filter on the Peugeot 207 1.6 HDI, as well as on the 1.4 HDI and all other models from th…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos