Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Stereo from a 2011 Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Car stereo

See other generations:
Video tutorial

If you want to remove the standard stereo from your 2011 Peugeot 308, follow the procedure outlined in this guide. First, switch off the car. Then, locate the four holes at the corners of the stereo and insert thin metal rods into them.

Next, pull the stereo towards you and disconnect the electrical cable at the back. Finally, completely remove the stereo, and the operation is successfully concluded.

You can then proceed to install the new stereo if desired.


Updated on 9 October 2026 by ScegliAuto


Related tutorials

How to Remove the Car Radio from Peugeot 308
How to Remove the Car Radio from Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) How do you remove the car radio installed in a Peugeot 308? Let's look at removing the original car radio. Start by removing the ashtray located near…
How to replace the car radio in the Peugeot 308?
How to replace the car radio in the Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) In this tutorial, we can see how to replace the car radio in the Peugeot 308, an extremely simple and fast operation. To do this, we will need two of…
How to remove the car radio from the Peugeot 308
How to remove the car radio from the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) Today we will explain how to remove the car radio from the Peugeot 308. Before removing the car radio, it is necessary to remove the upper and lower …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos