Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Stop Light Switch on a Peugeot 306

Model: Peugeot 306 MK 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Checks and maintenance

Video tutorial

How do you change the stop light switch on a Peugeot 306? We see this in the video: first, remove the panel located below the dashboard, then remove the lower steering column cover: just unscrew two screws, the rest is clipped in place. Also, remove the upper part of the steering column cover, which is held by two Torx screws, as is the cover that finishes the instrument cluster.

This is secured by two bolts, which we will remove to pull out the instrument cluster, being careful of the electrical connections behind it. Now, push the steering column down: there are two bolts to remove to lower it completely. Now we can see the stop light switch clearly.

Remove and replace it. This component can be found online at a very low price, after which we can start reassembling everything in reverse order, beginning with the instrument cluster and the cover, then lift the steering column back up and refit its cover.

Reattach the lower panel and the job is complete.


Updated on 13 October 2026 by ScegliAuto


Related tutorials

Peugeot 306 (1993-2002 / MK 1) Today, we will see in this brief and simple guide the steps that will allow us to remove and replace the low-pressure fuel pump on the Peugeot 306 2.…
Peugeot 306 (1993-2002 / MK 1) How do you remove the cover panel of the door? Let's see how to take off the door cover panel on a Peugeot 306. Remove the plastic covering around th…
Peugeot 306 (1993-2002 / MK 1) If the casing of your Peugeot 306 key needs replacing, the procedure is not complicated. First, remove the small screw located on the top of the key …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Replace the Battery in a 2022 Toyota Yaris Cross

The battery in the 2022 Toyota Yaris Cross is located under the front bonnet, next to the engine. To replace the battery, open the bonnet and remove the cover on the battery by pressing on the sides. After removing the cover, use a 13mm socket to undo the negative terminal nut, followed by the positive terminal. Remove the old battery and insert the new one. Connect the positive and negative terminals to restore battery function. Close the cover and start the vehicle to test its operation.

Watch the video!


by ScegliAuto

More videos