Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to find and how to reach the fuse box of a Peugeot 605?

Model: Peugeot Peugeot Various
Part: Fuse box

Video tutorial

The fuse box of a Peugeot 605 is located in the engine compartment. To access it, start by turning off the engine and ensuring the vehicle is parked safely.

Open the bonnet by pulling the release lever inside the car, usually located near the steering column. Once the bonnet is open, locate the fuse box, which is generally on the left side of the engine compartment, near the battery.

The fuse box is covered by a plastic lid. To access the fuses, carefully lift the lid, paying attention to the securing clips. Inside the box, you will find the fuses arranged in rows.

Refer to the owner's manual to identify the specific fuse you need to check or replace. After you finish, refit the lid ensuring it is securely fastened.

Close the bonnet and check that it is properly locked.


Updated on 13 October 2026 by ScegliAuto


Related tutorials

How to Understand the Fuse Diagram of a Peugeot 405
Peugeot Peugeot Various In this tutorial, you can observe the diagrams related to the arrangement of the fuses in a Peugeot 405. The first fuse box is located inside the veh…
What is the Fuse Diagram for the Peugeot 405 Diesel?
What is the Fuse Diagram for the Peugeot 405 Diesel?
Peugeot Peugeot Various The location of the fuses must be clear before addressing the topic of their wiring diagram. In the Peugeot 405, as shown in the video above, there i…
Replacing the Key Fob Case and Battery for Peugeot
Replacing the Key Fob Case and Battery for Peugeot
Peugeot Peugeot Various Using a small flat screwdriver, gently pry open a small section at a time in the joint between the two halves of the case. This will allow it to open…

Other guides you may be interested in

Where to Find and How to Remove the Spare Wheel of a Peugeot 5008?

The spare wheel of a Peugeot 5008 is located under the rear of the vehicle. To remove it, you need to lift the third row of seats to access the fixing bolt that holds the spare wheel in position. Using the correct spanner, proceed to unscrew the fixing bolt until the wheel is no longer secured. At this point, you can extract the spare wheel from underneath the vehicle. Once you have completed this step, you are free to fit the spare wheel. Ensure you correctly remount the spare wheel and securely tighten the fixing bolt when you are finished.

Watch the video!


by ScegliAuto

More videos