Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a 2018 Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

See other generations:
Video tutorial

To reset the service light on the second generation Peugeot 308, do the following: - switch off the ignition; - press the button located to the right of the instrument panel; - wait for the countdown to complete; - release the button; - switch off and then switch on the ignition again.

If the light does not reset, you may need to visit a garage for a computerised diagnosis to resolve the issue.

The cause is likely due to the ECU not recognising the new setting or, more simply, a faulty oil sensor that does not detect the oil level.


Updated on 14 October 2026 by ScegliAuto


Related tutorials

How to reset the "Service" light on a Peugeot 308?
How to reset the "Service" light on a Peugeot 308?
Peugeot 308 (2021-2026 / P5, MK 3) To reset the "Service" light on a Peugeot 308, start by turning on the ignition without starting the engine. Use the buttons on the steering wheel to…
How to Reset the Service Light on the Peugeot 308
How to Reset the Service Light on the Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Today, you will learn how to access the service light reset on the Peugeot 308 without contacting a garage. The reset should only be performed after …
How to reset the tyre pressure warning light on the Peugeot 308?
How to reset the tyre pressure warning light on the Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) To reset the tyre pressure warning light on the Peugeot 308, inflate the tyres until they reach the correct pressure value: this is indicated on the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos