Do it yourself
Frequently asked questions about cars and motorcycles
How to change engine oil on a Piaggio Beverly 125? Let's see in this video guide how to proceed with the replacement. We position the scooter on the original stand, with a socket wrench we unscrew the pin of the oil pan as in the video (we drain the liquid in a container). We unscrew the tightening screws of the container cap where the oil filter is located. We remove the worn oil filter kit (as shown in the video) and place a new one after having cleaned it (we check the gasket around the metal cap. Finally, top up the new liquid and close with the cap.

Posted on 6 November 2019 by ScegliAuto

Video tutorial

Related tutorials

Beverly 125 Let's find out in this guide how to replace the engine oil, carrying out the regular routine maintenance service, of the Piaggio Beverly 125 scooter.…
Beverly 125 In today's video we see how to open the Piaggio Beverly saddle in case the service battery has run out. First we proceed by opening the compartment o…
Beverly 125 In this new guide dedicated to your 2021 Piaggio Beverly, we will discover together how to replace the button battery inside the key. First of all, g…

How to Update the Time on a Honda CBR 600 RR

In this video, we will see how to update the clock on the Honda CBR 600RR: turn on the ignition by turning the key to position one, then use the two buttons located on the left side of the dial. Press and hold both buttons for a few seconds to enter the mode that allows you to change the time, which will be indicated by the time, located at the bottom right of the dial, just below the total mileage, starting to flash. Change the hour using the two buttons: the upper button will allow you to change the hour, and pressing it will increment the number by one, while holding it will speed up the change. Pressing the upper button will switch to minutes, and repeat the operation. Confirm with the upper button.

Watch the video!


by ScegliAuto

More videos