Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlamp Bulb on a Piaggio Vespa Primavera Scooter?

Model: Piaggio Vespa 150 Primavera
Part: Headlight bulb

Video tutorial

As shown in this tutorial, replacing the headlamp bulb on the Piaggio Vespa Primavera scooter is an extremely simple task. First, using an Allen key set, remove the fixing bolts of the handlebar fairing.

Next, once the front part is removed, disconnect the headlamp power connector, remove the large circular rubber cap, and extract the bulb by unscrewing the outer ring. Finally, insert the replacement bulb, taking care not to touch the glass directly with bare hands, as any residue can cause overheating.


Updated on 27 June 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp on a Piaggio Vespa 150 Primavera?
How to Replace the Front Headlamp on a Piaggio Vespa 150 Primavera?
Vespa 150 Primavera In this tutorial, you will learn how to replace the front headlamp on a Piaggio Vespa 150 Primavera, a very simple and quick operation. First, ensure…
How to Set the Clock on the Piaggio Vespa 125 Primavera
How to Set the Clock on the Piaggio Vespa 125 Primavera
Vespa 150 Primavera Below are the instructions to set the clock on the Piaggio Vespa 125 and 50 Primavera scooter. First, place the scooter on its stand and turn on the …
How to Set the Time on a Piaggio Vespa 150 Primavera
How to Set the Time on a Piaggio Vespa 150 Primavera
Vespa 150 Primavera This brief guide shows how to change the time on the display of the Piaggio Vespa 150 Primavera instrument panel. First, place the scooter on its cen…

How to Replace the Front Brake Pads on an Aprilia RS 457?

The front brake pads on an Aprilia RS 457 can be replaced by unscrewing the bolts that secure the caliper to the corresponding disc, allowing it to be removed: once the caliper has been removed, you can slide out the pin that holds the pads in their place. At this point, remove the old ones to insert the new ones: these must be secured with the appropriate pin, so that you can then reposition the caliper onto the disc. Now, secure the caliper with the bolts to ensure that the brake is functioning.

Watch the video!


by ScegliAuto

More videos