Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Fuse for the Lights on the Piaggio Liberty?

Model: Piaggio Liberty 125
Part: Fuse box

Video tutorial

The Piaggio Liberty, like all scooters, has a fuse box containing all the fuses for the electronic components. In the following video tutorial, we will explain how to locate and remove the headlight fuse.

The first step is to remove the outer central panel of the scooter to access the fuse box. Once removed, you can locate the fuses, the first one at the top right, which is red, and extract it. Insert a new fuse and reassemble everything. Now the light should work without any issues.


Updated on 28 September 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on a Piaggio Liberty 125
How to Replace the Headlight Bulb on a Piaggio Liberty 125
Liberty 125 This guide provides instructions on how to remove and replace the dipped and main beam bulb of the front headlamp on the Piaggio Liberty 125 scooter.…
How to open and repair the storage compartment of the Piaggio Liberty 125
How to open and repair the storage compartment of the Piaggio Liberty 125
Liberty 125 These short and simple instructions will show us how to open and repair the storage compartment drawer of the Piaggio Liberty 125 scooter. First, we …
How do you bleed the brakes on the Piaggio Liberty 125?
How do you bleed the brakes on the Piaggio Liberty 125?
Liberty 125 In order to bleed the brakes on the Piaggio Liberty 125, you will need to loosen the small drain plug located near the front and rear brake calipers.…

How to Replace Engine Oil in the Husqvarna TE 610?

In this tutorial, you will see how to replace the engine oil in the Husqvarna TE 610, a very simple and quick operation. Before proceeding, wait for the engine to cool completely to operate safely. Start by removing the lower protection panel, then locate the drain bolt on the right side and loosen it using a 14 mm socket spanner. Once all the oil has drained from the system, remove the filter, clean it of any dirt residue, and reassemble everything. Finally, insert the required amount of oil through the upper hole.

Watch the video!


by ScegliAuto

More videos