Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Porsche
    3. :
  3. Boxster
    4. : Battery

Porsche Boxster - Battery

Porsche Boxster (1996-2004 / 986, MK 1)
How to replace the key battery on the Porsche Boxster MK1
Let's see in this video how to remove and replace the key remote control battery on the Porsche Boxster first series, from 1996 to 2004, by following these …read all…
Posted on 21 February 2024 by ScegliAuto
Porsche Boxster (1996-2004 / 986, MK 1)
How to replace the battery on a Porsche boxer
How to replace the battery on a Porsche boxer? This video explains how to remove the battery: we open the car door and pull up the engine compartment opening …read all…
Posted on 24 October 2023 by ScegliAuto
Loudspeaker (1) Battery (2) Arm (1) Soft top (1) Bodywork (1) Timing belt (1) Checks and maintenance (4) Dashboard (2) Headlight (3) Tail light (1) Air filter (3) Accessory Kit (1) Headlight bulb (1) Engine (1) Starter motor (1) Engine oil (1) Rear bumper (1) Brake pads (1) Hydraulic pistons (1) Fuel pump (2) Radiator (2) Passenger compartment heating radiator (1) Fuse box (3) Seat (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos