Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Porsche
    3. :
  3. Boxster
    4. : Dashboard

Porsche Boxster - Dashboard

Porsche Boxster (1996-2004 / 986, MK 1)
How to replace the dashboard of the Porsche Boxster
As a first operation, press the button for the 4 arrows and remove it by pulling it towards you, then also remove the hole cover which is on the side …read all…
Posted on 27 September 2023 by ScegliAuto
Porsche Boxster (1996-2004 / 986, MK 1)
How to replace the dashboard of your car
In the dashboard of our car, usually, various devices are housed (such as the car radio, air vents, air conditioning system and various controls) and the …read all…
Posted on 9 September 2023 by ScegliAuto
Loudspeaker (1) Battery (2) Arm (1) Soft top (1) Bodywork (1) Timing belt (1) Checks and maintenance (4) Dashboard (2) Headlight (3) Tail light (1) Air filter (3) Accessory Kit (1) Headlight bulb (1) Engine (1) Starter motor (1) Engine oil (1) Rear bumper (1) Brake pads (1) Hydraulic pistons (1) Fuel pump (2) Radiator (2) Passenger compartment heating radiator (1) Fuse box (3) Seat (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos