Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Porsche
    3. :
  3. Boxster
    4. : Headlight

Porsche Boxster - Headlight

Porsche Boxster (2012-2015 / 981, MK 3)
Disassembly of the front headlight of the Porsche Boxster.
Let's briefly see the instructions that will allow us to disassemble and replace the front headlight of the Porsche Boxster, following these simple and quick …read all…
Posted on 27 June 2023 by ScegliAuto
Porsche Boxster (1996-2004 / 986, MK 1)
Headlight replacement on Porsche Boxter and 996
Raise the hood and put on the appropriate support rod. Remove the cover inside the hood from the part of the headlight concerned by unscrewing the plastic …read all…
Posted on 9 January 2024 by ScegliAuto
Porsche Boxster (1996-2004 / 986, MK 1)
Removal of the Porsche Boxter headlight
If we have a broken headlight, we need to replace it. Let's see how to remove the headlight on Porsche Boxter. We open the front hood by pulling the lever …read all…
Posted on 29 November 2023 by ScegliAuto
Loudspeaker (1) Battery (2) Arm (1) Soft top (1) Bodywork (1) Timing belt (1) Checks and maintenance (4) Dashboard (2) Headlight (3) Tail light (1) Air filter (3) Accessory Kit (1) Headlight bulb (1) Engine (1) Starter motor (1) Engine oil (1) Rear bumper (1) Brake pads (1) Hydraulic pistons (1) Fuel pump (2) Radiator (2) Passenger compartment heating radiator (1) Fuse box (3) Seat (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos