Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Porsche
    3. :
  3. Boxster
    4. : Fuel pump

Porsche Boxster - Fuel pump

Porsche Boxster (1996-2004 / 986, MK 1)
How to replace the petrol pump on the Porsche Boxster
Let's see today the instructions that will allow us to disassemble and replace the fuel pump of the Porsche Boxster, in simple steps. First we open the front …read all…
Posted on 30 October 2022 by ScegliAuto
Porsche Boxster (1996-2004 / 986, MK 1)
Porsche Boxster fuel pump replacement
Today we will see, in this video tutorial, how to disassemble and replace the fuel pump of a 1998 Porsche Boxster first series. First of all, we access the …read all…
Posted on 9 February 2024 by ScegliAuto
Loudspeaker (1) Battery (2) Arm (1) Soft top (1) Bodywork (1) Timing belt (1) Checks and maintenance (4) Dashboard (2) Headlight (3) Tail light (1) Air filter (3) Accessory Kit (1) Headlight bulb (1) Engine (1) Starter motor (1) Engine oil (1) Rear bumper (1) Brake pads (1) Hydraulic pistons (1) Fuel pump (2) Radiator (2) Passenger compartment heating radiator (1) Fuse box (3) Seat (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos