Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Porsche
  4. :
  5. Boxster
  6. : Porsche Boxster fuel pump replacement

Porsche Boxster - Video tutorial

Model: Porsche Boxster 986, MK 1 - Years 1996-2004
Part: Fuel pump
Operation: Porsche Boxster fuel pump replacement

Today we will see, in this video tutorial, how to disassemble and replace the fuel pump of a 1998 Porsche Boxster first series. First of all, we access the engine compartment and remove the battery, unscrewing the two terminals (positive and negative pole) and removing the battery holder; so we have access to our fuel pump, which we find immediately below. At this point we are going to unscrew the fixing ring nut and disconnect the electrical connector and the petrol pipe; then extract it and replace it with the new one, applying the reverse procedure for reassembly!


Posted on 9 February 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos