Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Porsche
    3. :
  3. Boxster
    4. : Air filter

Porsche Boxster - Air filter

Porsche Boxster (1996-2004 / 986, MK 1)
How to replace the air filter on a Porsche Boxster
Before we can start, we will have to go to open the rear door and the hood cover of our Porsche Boxster. Let's start by disengaging and removing the top cover …read all…
Posted on 18 February 2024 by ScegliAuto
Porsche Boxster (1996-2004 / 986, MK 1)
How to change the air filter on Porsche Boxter
Change the air filter of the Porsche Boxter? Let's see how the air filter is removed from inside the engine compartment. We lift up the bonnet, unhook the …read all…
Posted on 20 December 2023 by ScegliAuto
Porsche Boxster (1996-2004 / 986, MK 1)
Engine air filter replacement
Replacing this filter is very simple and should be done often to keep the engine efficient. Open the bonnet and release the engine from the protection by …read all…
Posted on 1 July 2023 by ScegliAuto
Loudspeaker (1) Battery (2) Arm (1) Soft top (1) Bodywork (1) Timing belt (1) Checks and maintenance (4) Dashboard (2) Headlight (3) Tail light (1) Air filter (3) Accessory Kit (1) Headlight bulb (1) Engine (1) Starter motor (1) Engine oil (1) Rear bumper (1) Brake pads (1) Hydraulic pistons (1) Fuel pump (2) Radiator (2) Passenger compartment heating radiator (1) Fuse box (3) Seat (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos