Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Porsche
    3. :
  3. Boxster
    4. : Radiator

Porsche Boxster - Radiator

Porsche Boxster (1996-2004 / 986, MK 1)
Removal of the Porsche Boxster 986 radiator
Let's see the instructions that we will need to remove the cooling radiator on a Porsche Boxter 986 first series. First we open the front luggage compartment …read all…
Posted on 30 March 2024 by ScegliAuto
Porsche Boxster (1996-2004 / 986, MK 1)
How to replace the coolant on the Porsche Boxster 986
The guide shows you how to bleed and replace the engine coolant of the Porsche Boxster 986. To drain the old coolant you need to safely lift the car and remove …read all…
Posted on 6 March 2024 by ScegliAuto
Loudspeaker (1) Battery (2) Arm (1) Soft top (1) Bodywork (1) Timing belt (1) Checks and maintenance (4) Dashboard (2) Headlight (3) Tail light (1) Air filter (3) Accessory Kit (1) Headlight bulb (1) Engine (1) Starter motor (1) Engine oil (1) Rear bumper (1) Brake pads (1) Hydraulic pistons (1) Fuel pump (2) Radiator (2) Passenger compartment heating radiator (1) Fuse box (3) Seat (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos