Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Radiator from a Porsche Boxster 986

Model: Porsche Boxster MK 1, 986 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Radiator

See other generations:
Video tutorial

Follow these instructions to remove the cooling radiator from a first-generation Porsche Boxster 986. First, open the front trunk and remove the upper screws to take off the plastic cover; then, unscrew the additional screws located underneath, as shown in the video.

Next, remove the side turn signals by taking out the bulbs, and unscrew the fender screws, also removing the plastic clips.

Now, disconnect and remove the front bumper. This will give you access to the radiator, where you will unscrew the Torx mounting screws and disconnect the coolant hoses, as shown in the video!


Updated on 4 May 2026 by ScegliAuto


Related tutorials

How to Replace the Heater Core in a Porsche Boxster
How to Replace the Heater Core in a Porsche Boxster
Porsche Boxster (1996-2004 / MK 1, 986) To replace the heater core in the cabin of the Porsche Boxster, open the hood to access the components located in the engine compartment. First, remo…
How to Change Engine Oil and Oil Filter on Porsche Boxster 986
How to Change Engine Oil and Oil Filter on Porsche Boxster 986
Porsche Boxster (1996-2004 / MK 1, 986) In this video, follow the step-by-step process to change the engine oil and oil filter on a Porsche Boxster 986 as part of regular maintenance. First…
How to Remove the Side Air Intake (Snorkel) on Porsche Boxster 986
How to Remove the Side Air Intake (Snorkel) on Porsche Boxster 986
Porsche Boxster (1996-2004 / MK 1, 986) In this short video, you will see how to remove and replace the side air intake or snorkel on a Porsche Boxster 986 in simple and quick steps. First,…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos