Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Engine Oil and Oil Filter on Porsche Boxster 986

Model: Porsche Boxster 986, MK 1 - Years 1996-2004
Part: Engine oil

In this video, follow the step-by-step process to change the engine oil and oil filter on a Porsche Boxster 986 as part of regular maintenance. First, lift the vehicle and remove the oil drain plug using a socket wrench, allowing the oil to drain into a container for at least ten minutes. Next, remove the oil filter located next to the oil pan using the appropriate tool. At this point, install the new filter, tightening it with a torque wrench; then, add the new engine oil!

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Brake Master Cylinder on a Porsche Boxster 986
Replacing the Brake Master Cylinder on a Porsche Boxster 986
Porsche Boxster (1996-2004 / 986, MK 1) In this video tutorial, you will learn how to remove the brake master cylinder from a Porsche Boxster 986. Open the hood and first remove the brake p…
How to Remove the Side Air Intake (Snorkel) on Porsche Boxster 986
How to Remove the Side Air Intake (Snorkel) on Porsche Boxster 986
Porsche Boxster (1996-2004 / 986, MK 1) In this short video, you will see how to remove and replace the side air intake or snorkel on a Porsche Boxster 986 in simple and quick steps. First,…
Removing the Radiator from a Porsche Boxster 986
Removing the Radiator from a Porsche Boxster 986
Porsche Boxster (1996-2004 / 986, MK 1) Follow these instructions to remove the cooling radiator from a first-generation Porsche Boxster 986. First, open the front trunk and remove the uppe…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos