Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Side Air Intake (Snorkel) on Porsche Boxster 986

Model: Porsche Boxster MK 1, 986 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004

See other generations:
Video tutorial

In this short video, you will see how to remove and replace the side air intake or snorkel on a Porsche Boxster 986 in simple and quick steps. First, get a Phillips screwdriver and insert it into the air intake, where you will find the mounting screw; once removed, gently pull the air intake outward to remove it, as shown in the video.

At this point, also remove the side bracket found inside; simply replace it with the new one by applying the reverse procedure of disassembly!


Updated on 14 April 2026 by ScegliAuto


Related tutorials

Replacing the Brake Master Cylinder on a Porsche Boxster 986
Replacing the Brake Master Cylinder on a Porsche Boxster 986
Porsche Boxster (1996-2004 / MK 1, 986) In this video tutorial, you will learn how to remove the brake master cylinder from a Porsche Boxster 986. Open the hood and first remove the brake p…
How to Remove the Starter Motor from the Porsche Boxster 986
How to Remove the Starter Motor from the Porsche Boxster 986
Porsche Boxster (1996-2004 / MK 1, 986) This guide shows how to replace the starter motor on the Porsche Boxster 986. After disconnecting the hood and opening the upper engine cover, discon…
Removing the Radiator from a Porsche Boxster 986
Removing the Radiator from a Porsche Boxster 986
Porsche Boxster (1996-2004 / MK 1, 986) Follow these instructions to remove the cooling radiator from a first-generation Porsche Boxster 986. First, open the front trunk and remove the uppe…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos